Buildings with over-lit areas or daylight from windows or skylights can waste up to 75% of fluorescent lighting energy cost.

• BALLAST CUTS COST UP TO 75%
  WITH SAME LIGHTING QUALITY.
  
  
• Each Axis ballast can be individually set for up to 60% dimming.
• Each ballast has its own daylight harvesting “ceiling poke-through” sensor to reduce power equal to lighting provided by daylight.
• Sensors in each fixture maintain
  uniform lighting.
• Payback is as short as 24 months.

Sensor Characteristics

• Each Axis ballast includes daylight sensor and dimming switch.
• “Poke-through” sensor is almost flush with ceiling and unnoticeable.
• Sensor detects and responds to outside light in its own space to maximize energy savings.

Performance

• Each fixture maximizes savings based on proximity to outside light.
• Sensor system assures light levels are maintained during the day.

Model Types And Installation

• Axis rapid-start ballasts are available in 2, 3 or 4 lamp models.
• Installation time is similar to installing a conventional ballast.
• The sensor adds only a couple of minutes installation per fixture.
• There is no need for expensive separate controls or long wiring runs.

Power And Lighting Quality

• Lamps operate with no visible flicker at all levels of savings.
• Power factor is greater than 98% to enhance power quality.
• Input current Total Harmonic Distortion will not exceed 10%.

Each Axis Ballast Includes Light Sensor (right)
and Dimming Level Switch (left)